Aqmos R2d272 Installation: New

2026-04-19

The softener needs a drain for regeneration cycles. Connect a hose from the drain fitting on the valve to a nearby drain. Ensure the drain line is secure, as it can move during high-pressure cycles. Do not make the drain hose too long or too high, or the unit may not drain properly. 5. Connecting the Overflow Line

Choose a dry, level, and frost-free location close to your main water supply and a drain, such as a basement or utility room. aqmos r2d272 installation new

The Aqmos R2D2-72 system includes a cabinet housing (salt tank), a control valve, and a 1-inch mounting block with connection set, so the system is ready for quick installation.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. 2026-04-19 The softener needs a drain for regeneration

: Insert flat gaskets into the armored hoses. Screw one end to your mounting block and the other to the softener's inlet/outlet.

Thread the flexible stainless steel hoses from the mounting block to the 1" AG connection ports on the BNT 1650 valve head. Ensure the gaskets are seated perfectly flat inside the compression fittings to eliminate the risk of leaks. Connect the raw water supply to the valve inlet port and line up the treated water line to the valve outlet port. 4. Creating a Hygienic Waste Water Connection Do not make the drain hose too long

Check the unit thoroughly for any signs of weeping or leaking. First-Time Programming and Commissioning

: It requires roughly 150mm of space behind the unit for pipe connections and space above to remove the lid. A wastewater and overflow drain must also be nearby. Amazon.com.be Performance Highlights

Which of those would you like next?