Arminius Revolver Manual Of Arms Free

Never assume a cylinder is empty.

Prior to handling, executing maintenance, or loading, you must clear the weapon: Point the muzzle in a verified safe direction.

Hold the revolver in your non-dominant hand, keeping the cylinder swung open to the left. Point the muzzle downward toward the ground. Arminius Revolver Manual Of Arms

Press the ejector rod upward to clear any live ammunition or spent casings. Visually and physically inspect each of the cylinder chambers to confirm they are empty. Operating Procedures (Manual of Arms) Loading the Revolver Clear the weapon using the steps above.

: Pulling the trigger through its full travel will cock and release the hammer in one continuous motion. Single-Action Never assume a cylinder is empty

Open the loading gate on the right side of the frame (if applicable), or pull the cylinder pin forward to remove the cylinder completely.

Insert the rounds into the cylinder, twist or press the speedloader release knob, and discard the empty speedloader. Close and lock the cylinder. 4. Firing Operation (Manual of Arms) Point the muzzle downward toward the ground

Place your dominant thumb securely over the thumb spur of the hammer. Apply firm rearward pressure to the hammer.

: Treat every firearm as if it is loaded. When receiving a gun, immediately open the action to visually and physically inspect the chambers and barrel for obstructions. Operational Procedures Arminius revolvers typically feature a swing-out cylinder double-action trigger mechanism. Point the muzzle in a safe direction.

Because many Arminius revolvers feature alloy components, perform regular structural timing checks: Potential Cause

The front end of the barrel where the projectile exits.