: Use your stud finder to locate two adjacent wood studs. Mark the center of each stud. Hold the wall plate at your desired height, use the bubble level to ensure it is straight, and mark the pilot hole locations directly over the stud centers. Drill your pilot holes 2.5 inches deep using a 3/16" drill bit.
The is a heavy-duty, space-saving mounting solution built to support screens ranging from 32 to 100 inches with a maximum weight capacity of 55 kg (121 lbs) . Available at major retailers like Home Bargains , this bracket offers three adaptable mounting options: low-profile flat alignment, an 8-degree downward tilt, or a 10-degree downward tilt to eliminate glare and optimize your viewing angle.
Position the wall plate over the anchors and drive the lag bolts into place until tight. Step 4: Hang the TV onto the Wall Plate
Most Plasma, LCD, and LED widescreen TVs from 32" to 100".
Equatech is known for manufacturing heavy-duty, universal mounting solutions. The model range for typically includes:
If the back of your TV is curved or recessed, insert the plastic spacers between the TV and the brackets.
This mount supports VESA patterns ranging from 200x200mm up to 600x400mm. If your 100-inch TV exceeds this, stop immediately; this is the wrong mount.
Have a unique installation issue? Check the official Equatech support portal for video guides or contact their chat support for real-time help.
Offers three mounting options: flat, 8-degree tilt, and 10-degree tilt for optimal viewing angles. Dimensions: H43 x W36.8 x D1.1cm. Installation Instructions
