series, including Small Form Factor (SFF) and Microtower (MT) models
Based on the keyword string provided, you are referring to the , which corresponds to the ** motherboard used in the HP Z2 Tower G4 Workstation**.
DisplayPort, VGA, or DVI (varies by revision; integrated graphics depend on the installed CPU). USB Ports: Mix of USB 3.0 (Blue) and USB 2.0 ports. hp fxn1 e93839 motherboard specs updated
The rear I/O panel is standardized to the HP 800 G3 SFF case: 2x DisplayPort 1.2 1x USB-C 3.1 4x USB 3.1 Gen 1 2x USB 2.0 1x RJ-45 Gigabit Ethernet Audio Jacks (Line in/out, Microphone) 6. Power and Compatibility
The motherboard has multiple SATA ports. Based on the chipset's capabilities, it likely provides a mix of SATA II (3Gb/s) ports for older drives and SATA III (6Gb/s) ports for modern SSDs, which are ideal for a significant speed boost. series, including Small Form Factor (SFF) and Microtower
Modified/Proprietary (specifically for Elite 8200 chassis) Memory 4 DIMM slots; supports DDR3 SDRAM (1333 MHz) Max RAM
: This board uses a non-standard 6-pin power connector instead of the industry-standard 24-pin ATX connector. It requires a compatible HP power supply Form Factor The rear I/O panel is standardized to the
This board is designed for standard DDR3 modules but has limitations on total capacity. RAM Configuration 2x 240-pin DIMM Type: DDR3 Non-ECC, Unbuffered Speeds: 1066 MHz, 1333 MHz, 1600 MHz Max Capacity: 16GB total Storage Interfaces SATA: 4x SATA II (3.0 Gb/s) ports Note: This board usually lacks SATA III (6.0 Gb/s) 🔌 Expansion & I/O Ports
2 x PS/2 ports (for legacy keyboard and mouse, present on specific sub-models) Internal Header Connections 1 x 4-pin CPU Fan Header 1 x 4-pin System/Chassis Fan Header 1 x Front Panel Audio Header 1 x Proprietary HP Front Panel Switch/LED Header
The motherboard layout often places SATA ports or RAM slots directly in line with the PCIe x16 slot. Measure your chassis clearance and check for physical obstructions before buying a long or thick graphics card.