Keyence Gs-11pc Manual [exclusive] Link

SIL3 (IEC 61508), PLe (EN ISO13849-1), Category 4. Detection Method: Magnetic Technology Operating Temperature: -20∘Cnegative 20 raised to the composed with power C +55∘Cpositive 55 raised to the composed with power C

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

): 10 mm (The distance at which the switch is guaranteed to turn ON). Assured Releasing Distance ( Sarcap S sub a r end-sub keyence gs-11pc manual

: The actuator (sold separately, typically the GS-A22) must be aligned within the specified detection range. The GS-11PC features a large alignment tolerance to accommodate sagging doors.

is a highly reliable, non-contact standard type safety interlock door sensor. It utilizes and an 8-pin M12 connector connection to integrate seamlessly into machine safety guarding systems. SIL3 (IEC 61508), PLe (EN ISO13849-1), Category 4

* 安全機器 * セーフティドアスイッチ / セーフティドアセンサ * セーフティドアセンサ * 非接触 標準タイプ PNP M12コネクタタイプ キーエンス GS-11PC-instructions-2025-03-18.pdf - Ferndale Safety

Its compact footprint allows for mounting in tight spaces where traditional mechanical interlocks cannot fit. If you share with third parties, their policies apply

When using the GS-11PC as a standalone unit (not cascaded), the OSSD inputs must be tied to +24 VDC to enable the outputs. Connect to +24 VDC. Connect Pin 7 (Blue) to 0 VDC. Connect Pin 4 (Yellow) and Pin 8 (Red) to +24 VDC.

If the official download fails, try these secondary sources:

The actuator can approach the switch from the front or the sides. Ensure the marked sensing faces match up directly. LED Status Indicators

The sensor is vibrating or the door is sagging, causing the actuator to drift in and out of the sensing range. Tighten the mounting brackets. Maintenance and Safety Checks