Lenovo Is6xm Rev 1.0 Motherboard Manual [top]

| Feature | Details | |-----------------------|----------------------------------------------| | Form factor | micro-ATX (24.5 cm × 24.5 cm approx.) | | CPU socket | LGA 1155 | | Supported CPUs | Intel Core 2nd gen (Sandy Bridge) — e.g., i3, i5, i7 (some 3rd gen with BIOS update) | | Chipset | Intel Q67 Express | | Memory slots | 4 x DDR3 DIMM (dual channel) | | Max memory | 16 GB (unofficially 32 GB with 8 GB modules) | | Memory speed | 1066 / 1333 MHz (non-ECC) | | Expansion slots | 1 x PCIe x16, 2 x PCIe x1, 1 x PCI | | Storage interfaces | 4 x SATA II (3 Gb/s), 2 x SATA III (6 Gb/s) | | Integrated graphics | Intel HD Graphics (from CPU) | | Rear I/O | PS/2, 6 x USB 2.0, VGA, RJ-45 LAN, audio jacks (line-out, mic, line-in), optional serial port | | Internal connectors | USB headers, COM header, LPT header, front panel audio, chassis fan, CPU fan | | Networking | Realtek RTL8111E (Gigabit Ethernet) | | Audio | Realtek ALC662 (5.1 channel) |

+-------------------------------------------------------------+ | [Rear I/O Ports] [ATX_12V] | | (4-Pin) | | PCIe 2.0 x16 Slot [LGA1155] | | [ CPU ] | | PCIe 2.0 x1 Slot [Socket] | | | | PCI 2.3 Slot 1 [CPU_FAN] | | | | PCI 2.3 Slot 2 CH-A DIMM 1 | | CH-A DIMM 2 | | [AUDIO_HD] CH-B DIMM 1 | | CH-B DIMM 2 | | [LPT_Header] | | [24-Pin Power] | | [COM_Header] [Intel Q67 PCH] | | (Under Heatsink) [SATA III_1] | | [CLR_CMOS] [SATA III_2] | | [CR2032] [SATA II_1] | | [THER_HD] [SATA II_2] | | [F_USB1] [F_USB2] [F_PANEL] | +-------------------------------------------------------------+ CPU & Memory Support Guidelines Processor Compatibility

Move the plastic jumper block from (Default running position) to Pins 2-3 (Clear position). Wait 15 seconds, then move the jumper back to Pins 1-2 . Reconnect power and boot the system. Front Panel USB Headers (F_USB1 / F_USB2) Lenovo Is6xm Rev 1.0 Motherboard Manual

Do you need the exact for the audio or USB headers?

Keeping your BIOS and drivers up-to-date is vital for system stability and compatibility. Front Panel USB Headers (F_USB1 / F_USB2) Do

If you are currently working on this motherboard and need specific help, let me know:

BIOS updates for this board are typically done via a Windows-based flasher found on Lenovo's site, supporting UEFI and Secure Boot. 6. Troubleshooting BIOS Updates: To enable dual-channel memory

The Lenovo IS6XM Rev 1.0 is specifically optimized for (Sandy Bridge) processors built on the 32nm process. Supported Models (32nm) Intel Core i7 i7-2600, i7-2600S Intel Core i5 i5-2500, i5-2500S, i5-2500T, i5-2400, i5-2400S, i5-2320 Intel Core i3 i3-2100, i3-2120, i3-2125, i3-2130 Pentium/Celeron G860, G630, G540, G530, G440

The most significant roadblock when configuring the IS6XM outside its original ThinkCentre frame is the . A standard computer case features separated 2-pin or 1-pin internal cables. Use the layout guide below to connect your aftermarket chassis wiring to the integrated F_PANEL block:

This board uses a non-standard mounting hole pattern and a proprietary front panel header. If you are moving it to a new case, you will likely need a Lenovo 14-pin to 24-pin power adapter and a custom wiring solution for the power button and LEDs. BIOS Updates:

To enable dual-channel memory, install memory modules in pairs (e.g., Slots 1 & 3 or Slots 2 & 4).