Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Work Better -

| Part Name | Part Number | Replacement Interval | |-----------|-------------|----------------------| | Air intake filter | PR70-FILT | 3 months | | Quick-connect seal kit | PR70-QCK | 6 months | | Hose (10 ft) | PR70-H10 | As needed (leaks) | | Pressure dial knob | PR70-KNOB | As needed | | Motor carbon brushes | PR70-BRUSH | 700 hours |

Check that the door structure is rigid, perfectly level, and moves smoothly on its tracks.

Ensure the garage door is properly balanced and operational before installing the motor. 2. Technical Specifications (Page 2) LIFE Probo PR70 Power Supply: Motor Voltage: Force: Maximum Door Area: (depending on type) Speed: Operating Temperature: -20∘Cnegative 20 raised to the composed with power C +70∘Cpositive 70 raised to the composed with power C Protection Rating: IP 20 3. Components List & Preparation (Page 3) Operator Head: PR70 motor unit Rail Assembly: Pre-assembled guide rail (chain or belt) Mounting Bracket: Ceiling mount brackets Door Bracket: Sectional/Up-and-over connector arm | Part Name | Part Number | Replacement

The Life PROBO PR70 is a high-quality product that will provide years of trouble-free service when installed and maintained correctly. By strictly adhering to the professional installation requirements, safety precautions, and maintenance schedule outlined in this manual, you can ensure safe, reliable, and convenient automation for your garage door for years to come.

| Rev | Date | Changes | |-----|------|---------| | 1.0 | [Date] | Initial release | Technical Specifications (Page 2) LIFE Probo PR70 Power

: Pull the release lever to close the gate, rest the mechanical stop against the drive carriage, and fix it in place montaza.lv Opening Stop

: In the event of a power failure, pull the cord connected to the mobile trolley to move the door manually. To reconnect, move the door back to its initial position until it hooks up Peiter Automatic Radio Control Programming button on the control unit; the red LED will flash montaza.lv | Rev | Date | Changes | |-----|------|---------| | 1

Pull the manual emergency release lever to lower the garage door completely. Slide the physical closing mechanical stop block along the rail until it firmly meets the drive carriage. Tighten the fastening bolt securely.

Clean the photocell lenses, realign the optical beams, or verify terminal 3-4 wiring.