Merlin Gerin Multi 9 Ic | 2000 P Manual

| Specification | Details | | :--- | :--- | | | 230V AC +10% / -15% at 50/60Hz | | Light Level Adjustment | 2 - 2000 lux (Two Ranges: 2-35 and 35-2000) | | Time Delay | 80 seconds (immume to variations shorter than 80s) | | Programmable Cycles | 42 On/Off operations per week (Daily or Weekly) | | Max Switching Current | 10A (inductive load) / 16A (resistive load) | | Max Switching Power (Incand.) | 2600W | | Max Switching Power (Fluor.) | 2300VA | | Standby Consumption | < 0.5W | | Ambient Temp (Operation) | -40°C to 70°C | | Protection (Unit / Sensor) | IP20 (main unit) / IP66 (sensor front) | | Mounting | TH35 DIN rail (EN 60715) |

If you need help adjusting this device for a specific environment, please share:

The Merlin Gerin Multi 9 IC 2000 P is a programmable twilight switch designed to manage lighting circuits based on ambient light levels and pre-set time schedules. Originally manufactured by Merlin Gerin (now fully integrated into Schneider Electric), this device optimizes energy efficiency in commercial, industrial, and residential environments. Merlin Gerin Multi 9 Ic 2000 P Manual

Supports 24-hour and 7-day cycles with up to 42 memory settings .

Replace the internal battery cell (refer to Schneider Electric factory service if the battery is soldered to the board) or ensure continuous mains power feed. | Specification | Details | | :--- |

Summary

Looking for the Merlin Gerin Multi 9 IC2000P manual? The Multi 9 IC2000P is a modular industrial control/relay interface unit used in electrical distribution and automation panels. For installation, wiring, and safe operation, consult the official product manual which covers: Replace the internal battery cell (refer to Schneider

Approximately 20 seconds on ON, 80 seconds on OFF (prevents flickering from car headlights or passing clouds) Power Consumption: Under 6 VA Operating Temperature (Switch): -10°C to +55°C Operating Temperature (Cell): -30°C to +60°C

The output is a dry-contact relay.

A rotary dial used to set the exact Lux level at which the connected lights should activate.

Wait roughly 20 seconds. The LED will stop flashing and turn solid green. You will hear an audible click from the internal relay, and the connected lights will turn on.

| Specification | Details | | :--- | :--- | | | 230V AC +10% / -15% at 50/60Hz | | Light Level Adjustment | 2 - 2000 lux (Two Ranges: 2-35 and 35-2000) | | Time Delay | 80 seconds (immume to variations shorter than 80s) | | Programmable Cycles | 42 On/Off operations per week (Daily or Weekly) | | Max Switching Current | 10A (inductive load) / 16A (resistive load) | | Max Switching Power (Incand.) | 2600W | | Max Switching Power (Fluor.) | 2300VA | | Standby Consumption | < 0.5W | | Ambient Temp (Operation) | -40°C to 70°C | | Protection (Unit / Sensor) | IP20 (main unit) / IP66 (sensor front) | | Mounting | TH35 DIN rail (EN 60715) |

If you need help adjusting this device for a specific environment, please share:

The Merlin Gerin Multi 9 IC 2000 P is a programmable twilight switch designed to manage lighting circuits based on ambient light levels and pre-set time schedules. Originally manufactured by Merlin Gerin (now fully integrated into Schneider Electric), this device optimizes energy efficiency in commercial, industrial, and residential environments.

Supports 24-hour and 7-day cycles with up to 42 memory settings .

Replace the internal battery cell (refer to Schneider Electric factory service if the battery is soldered to the board) or ensure continuous mains power feed.

Summary

Looking for the Merlin Gerin Multi 9 IC2000P manual? The Multi 9 IC2000P is a modular industrial control/relay interface unit used in electrical distribution and automation panels. For installation, wiring, and safe operation, consult the official product manual which covers:

Approximately 20 seconds on ON, 80 seconds on OFF (prevents flickering from car headlights or passing clouds) Power Consumption: Under 6 VA Operating Temperature (Switch): -10°C to +55°C Operating Temperature (Cell): -30°C to +60°C

The output is a dry-contact relay.

A rotary dial used to set the exact Lux level at which the connected lights should activate.

Wait roughly 20 seconds. The LED will stop flashing and turn solid green. You will hear an audible click from the internal relay, and the connected lights will turn on.