Phison | Mpall V5.13.0c New!

Before starting:

Run the diagnostic tool and look for the (must be Phison) and the Controller Part-Number (e.g., PS2251-07). Note down the Flash ID code and Firmware Version displayed. Step 2: Download the Matching Firmware Files MPALL requires two distinct binary files to flash a drive:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Phison Mpall V5.13.0c

Before downloading MPALL, download a hardware diagnostics utility like or ChipGenius . Plug your broken USB drive into a USB 2.0 port. Launch ChipGenius or Flash Drive Information Extractor. Check the Controller Vendor and Controller Part Number .

Disclaimer: This process involves low-level firmware flashing. If done incorrectly, it can permanently brick your USB drive. Proceed at your own risk. 1. Preparation Before starting: Run the diagnostic tool and look

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Once you have downloaded the MPALL V5.13.0c package and the correct firmware files, place all files into a single folder. This link or copies made by others cannot be deleted

Many users have successfully revived their drives using Phison MPALL v5.13.0c:

Unplug your USB drive, re-insert it into your computer, and format it through Windows Disk Management to complete the restoration. Troubleshooting Common Errors "CT - Read Only / Write Protect Error"