Connect the included to the DC port on the back.
: Drivers and additional documentation (if needed) are available on the UNITEK Support Page .
is a 4-Port Powered USB 3.0 Hub aimed at laptops, desktop computers, and other USB-A host devices. It combines high-speed data transfer with efficient power management for peripherals. Unitek USB 3.0 4-Port Hub (YST03004 type) Key Function: Expands 1 USB-A port to 4 USB-A ports. Data Speed: Supports SuperSpeed USB 3.0 (up to 5Gbps). Charging: Supports BC1.2 charging technology. Unitek YST03004 Verified Features & Specifications Based on official Unitek documentation, the includes the following key specifications: unitek yst03004 manual verified
If using external hard drives, ensure the hub is plugged into an external power source (if applicable) to ensure all four ports have sufficient power (5V/1.5A per port).
is a "mini" external docking station that supports both 2.5-inch and 3.5-inch SATA I/II/III hard drives (HDD) and solid-state drives (SSD). It is widely used for data backups, system upgrades, and drive duplication. Key Specifications Connect the included to the DC port on the back
This article serves as a for the Unitek YST03004 manual. We have cross-referenced official documentation, user forums, and safety standards to bring you an authoritative guide covering specifications, button functions, calibration, error codes, and maintenance.
: Press and hold the Clone Button on the front panel for approximately 3 to 5 seconds until the LED indicators begin flashing. It combines high-speed data transfer with efficient power
Ensure the drive is fully seated in the SATA connector and the power cable is firmly connected.
: Provides visual status for power, data transfer, and cloning progress. Offline Cloning Procedure