Zk5kx - Manual

The ZK-5KX is a 5A, 80W buck-boost converter module featuring a wide 6.0V–36V input and 0.6V–36V output range, designed for DIY bench power supplies. It includes configurable protection mechanisms for over-voltage, over-current, over-power, and over-temperature, along with a rotary encoder for precise adjustments. For full manual details, refer to the documentation from eleneasy.com eleneasy.com zk-5kx_voltage-converter.pdf - eleneasy.com eleneasy.com zk-5kx_voltage-converter.pdf - eleneasy.com eleneasy.com

The adjustable protection parameters include:

If your screen looks significantly different from the descriptions above, you may have a specific regional firmware version. In that case, look for "User Mgmt" or "Enroll User" on the main menu icons.

This section details how to perform the essential operations of the ZK-5KX. zk5kx manual

While rated for 80W, the module can get very hot. If you are consistently pulling more than 3A or 50W, consider adding a small 12V fan to the heatsink.

According to standard instructions, the initial boot sequence should follow this order:

Short-press the button to enter the main configuration layer. A single digit of the voltage setting will begin flashing. The ZK-5KX is a 5A, 80W buck-boost converter

A dedicated table is vital. Example entries you might see:

Clear VIN+/VIN- (Input) and VOUT+/VOUT- (Output) terminal blocks. 3. Operating Instructions (Manual User Guide) A. Setting Voltage and Current

LCD module showing input/output voltage, current, power, capacity, and time [2]. Basic Operation In that case, look for "User Mgmt" or

Once the load tries to pull more than the set limit, the module automatically lowers the voltage to maintain that exact current. Setup Steps:

Long-press the button to save and return to the main operational interface. If you need help setting up your device, tell me: What power source are you using for the input ? What specific load or battery type do you want to power?